Brother MFC-9460CDN
$917.64
Reviews
Show product page
10 years ago
My first laser printer.
PROS I like all it's capabilities, and they all work well. Cost was 1/2 new price as it was a refurbished. It holds 250 sheets of blank paper. It is also a color printer. It was easy to set up. CONS It is noisy when printing.
10 years ago
The printer is very annoying with the message of replacing drum
The printer is very annoying with the message of replacing drum. I have never had this much problem with a printer before! This printer quality sucks and definitely will not buy the same printer again as few parts needs to be replace and its very expensive.
11 years ago
It was delivered duing the holiday season right on time, couldn't ask for more.
12 years ago
Great Small Business Printer
Overall, an excellent color laser printer for the price. I use this printer for producing my photo studio brochures and other daily printing needs. SETUP: Followed the guide and it was very easy. PRINT QUALITY: Not photo quality; but, very acceptable for my marketing pieces.
12 years ago
Very Good Product
This is a very good product. The quality output is excellent. The set up was a little challenging, wish it was wifi.
Pros:
- excellent print quality
Cons:
- heavy
12 years ago
Should have purchased it sooner
The printer is quiet, efficient and easy to use. It is quick on large files. I am sorry I waited so long to get it. The document feeder doesn't jam or take 2 pages at a time like my other other printer did. I would definitely recommend it.
12 years ago
So far so good!
Our old HP CM1017 MFP was dying after numerous repairs. We use our printer primarily for homeschooling copying & printing, so it gets a fair amount of use. I wanted something that cost less to operate per printed page. HP is expensive!
Pros:
- Duplex printing
- Latest Os Drivers
- Scan To Network Drive
Cons:
- Driver Install Slow
12 years ago
a bit noisy and quirky, but excellent value and quality
The software install is lengthy and fails easily, but once that is taken care of, the system operates quite well. The printing is quite good, slow duplexing but tolerable and nice-looking output.
13 years ago
O'Brother am I Disappointed!
I suggest you put duck tape over the sensor before you replace a cartridge at great expense and waste. You'll know when to replace the cartridge when the print quality suffers.
Pros:
- This thing eats printer cartridges and shuts it self down and will not print
- After purchasing $600 of printer cartridges I discovered via an internet search that the machine has bad toner sensors.
Cons:
- The machine shuts down and will not print without replacing the printer cartridges due to faulty sensors
- You cannot remove and replace the sensors, shake the tray, reinsert and expect to continue
- This thing shuts down cold even though there is no deterioration in print quality.
13 years ago
MFC-9460CDN CLR LASER P/S/C/F ENET 2400X600 128MB 25PPM
Won't buy from PC Nation again. Thought I was going to save some money and I didn't (my fault) paying attention to the shipping charges. Could have bought it cheaper locally!
Pros:
- Dependable and copies well and is easy to set up
Cons:
- Cartridge
- belt and drum costs
- they are very high
4.0
from 23 reviews
5
40.0%
4
31.0%
3
18.0%
2
0.0%
1
9.0%
